Hoe om die terminale blok te gebruik

---

Die bedradingsterminaal word gebruik om die verbinding van drade te vergemaklik. Dit is 'n metaalplaat wat in isolerende plastiek verseël is. Daar is gate aan albei kante om drade in te voeg, en skroewe word gebruik om vas te maak of los te maak. Byvoorbeeld, twee drade moet soms verbind word en moet soms ontkoppel word. Op hierdie tydstip, hulle kan enige tyd met terminale verbind en ontkoppel word, Dit is gerieflik en vinnig sonder om hulle aanmekaar te sweis of te wikkel.

Wiring terminals are suitable for the interconnection of many wires. In the power industry, there are special terminal blocks and terminal boxes, which are all wiring terminals, single-layer, double-layer, current, voltage, ordinary, breakable, en so aan. A certain crimping area is to ensure reliable contact and sufficient current.

The wiring terminals can be divided into, European wiring terminal series, plug-in wiring terminal series, transformer wiring terminal, building wiring terminal, fence wiring terminal series, spring wiring terminal series, track wiring terminal series, through wall wiring terminal series, optoelectric coupling wiring terminal series, 110 terminal, 205 terminal, 250 terminal, 187 terminal and OD2 2 ring terminal, ring terminal, ring terminal flag series terminal and sheath series, various ring terminals, tubular terminals, wiring terminals, copper strip and iron strip, ens.

The materials to be prepared for the use of wiring terminals include terminal lugs, screwdrivers, en drade.

1. Eerste, peel off the insulation skin of the wire by 6-8 mm.

2. Then insert the exposed wire into the wiring terminal.

3. Then tighten the top screw with a screwdriver.

4. Pull with your hand to make sure it doesn’t fall.

5. Then press the switch and see that the light is on so that the wiring of the terminal is completed.