A shielded control cable is generally used as the connection line of electrical instruments.
It is suitable for the connection line of electrical instruments with an AC-rated voltage of 450/750V and below and the transmission line of the automatic control system.
It has excellent properties such as oil resistance, water resistance, wear resistance, acid and alkali resistance, resistance to various corrosive gases, aging resistance, and non-combustibility.
A shielded control cable is a cable with a layer of mesh copper or metal wire woven around one or more wires. This layer of mesh metal wire can prevent lightning strikes and external signals cannot interfere with it.
The shield also provides some leakage protection. If the cable is damaged during use and leaks, the shield can direct the leakage current to the ground wire, providing some safety protection.
The role of shielding and grounding wire of shielded control cable is that the shielding layer is divided into internal shielding and external shielding.
They are both to make good contact between the cable conductor and insulation layer, and between the cable insulation layer and the inner protective layer, to eliminate the increase of surface electric field strength caused by the unsmooth surface of the conductor and the inner protective layer.
Product characteristics of shielded control cables.
(1) Allowable bending radius of the cable: the minimum bending radius of a non-armored cable is 6 times the outer diamita na USB. Fluoroplastic insulated and sheathed cables should be at least 8 lokutan na waje na USB na USB. Copper tape shielded or steel tape armored cable should be at least 12 lokutan na waje na USB na USB.
(2) Maximum operating temperature: polytetrafluoroethylene propylene (F46) insulation should not exceed 200 ℃. Soluble polytetrafluoroethylene (PFA) insulation should not exceed 260 ℃.
(3) Minimum ambient temperature. PVC sheath: fixed laying -40℃, non-fixed laying -15℃. Fluorine plastic and silicone rubber sheath: fixed laying -60℃, non-fixed laying -20℃. Cable installation and laying temperature shall not be lower than 0℃ (fluoroplastic, silicone rubber and nitrile sheathed cable shall not be lower than -25℃).
Kamar yadda makamashi mai sabuntawa ya ci gaba da samun lokacinta, its future will be shaped not just by…
Ni. Gabatarwa a cikin wata duniya suna fuskantar kalubalen zagayowar canjin yanayi da kuma rashin ƙarfi,…
3. Yadda za a zabi kebul na dama don aikace-aikacen gona 3.1 Select Cable Type Based…
An kori ta na duniya ta zamani ta zamani, agricultural production is rapidly transforming from traditional…
Kamar yadda masana'antar ma'adinai ta duniya ta ci gaba da fadada, mining cables have emerged as the critical…
Shigowa da: Muhimmancin injiniyan lantarki da kuma rawar da injin injin ZMS kebul, as…