Lus qhia

The Principle And Role Of A High-Voltage Line Arrester?


(1) The Role Of High-Voltage Line Arrester

High-voltage line arrester for 6 ~ 220kV AC transmission lines, is a new type of lightning arrester suspended and installed on the transmission tower.

Transmission line arrester: mainly insulated zinc oxide arrester.

Distribution line arrester: valve type arrester, tube type arrester, zinc oxide arrester, tus lwm yam.

The main role of the high-voltage line arrester is

Limit high-voltage line lightning overvoltage.

Improve the level of high-voltage line lightning resistance.

Reduce the tripping rate caused by lightning faults in the system.

(2) The Principle Of High-Voltage Line Arrester

A high-voltage line arrester has two forms.

One is usually installed in parallel with the line insulator string, the arrester can be connected in series to form a gap. And make the breakdown voltage is lower than the insulator string flashover voltage.

So that the high-voltage line arrester in the insulator string before the flashover breakdown, its installation is as follows.

Another is the gapless arrester directly into the system, the use of arrester resistance nonlinear this characteristic to protect the insulator string. Both can improve the level of lightning resistance of transmission lines, and thus reduce the rate of lightning tripping, increase the reliability of transmission line operation.

High-voltage line arrester and high-voltage line insulators in parallel. When the lightning strike arrester action, the residual voltage of the arrester is lower than 50% of the insulator string discharge voltage. Even if the lightning current increases, the residual voltage of the arrester only slightly increased, the insulator still does not occur flashover. After the lightning flow, the frequency continuation current flowing through the arrester is only milliampere, the frequency continuation current flowing through the arrester extinguishes at the first time over zero, will not trip, the system returns to normal.

The following figure illustrates the high-voltage line arrester and high-voltage line insulator volt-seconds characteristics of the cooperation relationship. The volt-second characteristics of the arrester than the insulator volt-second characteristics of more than 15% lower, when the backlash, can be lower than 20%.

    zmswacables

    Recent Posts

    Yav tom ntej ntawm lub zog txuas ntxiv: Tiam sis & Xav tau qhov tshiab

    As renewable energy continues to gain momentum, its future will be shaped not just by

    4 months ago

    Lub Zog Txuas Txuas Ntxiv: Hom, Cov txiaj ntsig, thiab cov nyom thiab cov nyom

    Kuv. Introduction In a world facing the twin challenges of climate change and resource depletion,…

    4 months ago

    Coj mus rau kev xaiv ua liaj ua teb thiab kev saib xyuas ntse

    3. Yuav ua li cas xaiv txoj cai cable rau kev thov kev ua liaj ua teb 3.1 Select Cable Type Based

    5 months ago

    Qhia Ua Teb Cable: Siv thiab cov yam ntxwv tseem ceeb

    Driven by the global wave of agricultural modernization, agricultural production is rapidly transforming from traditional

    5 months ago

    Txhawb koj li kuv li nrog txoj cai tsuas cables

    As the global mining industry continues to expand, mining cables have emerged as the critical

    6 months ago

    Daim Ntawv Qhia Txog Hluav Taws Xob engineering

    Lub hauv paus rau phau ntawv: The Importance of Electrical Engineering and the Role of ZMS Cable Electrical engineering, as

    7 months ago