Ako používať svorkovnicu

---

Káblová svorka sa používa na uľahčenie pripojenia vodičov. Ide o kovový plech zatavený v izolačnom plaste. Na oboch koncoch sú otvory na vloženie drôtov, a skrutky sa používajú na upevnenie alebo uvoľnenie. Napríklad, dva vodiče niekedy treba spojiť a niekedy odpojiť. V tomto čase, môžu byť pripojené pomocou svoriek a kedykoľvek odpojené, Je to pohodlné a rýchle bez ich zvárania alebo navíjania.

Wiring terminals are suitable for the interconnection of many wires. In the power industry, there are special terminal blocks and terminal boxes, which are all wiring terminals, single-layer, double-layer, current, voltage, ordinary, breakable, a tak ďalej. A certain crimping area is to ensure reliable contact and sufficient current.

The wiring terminals can be divided into, European wiring terminal series, plug-in wiring terminal series, transformer wiring terminal, building wiring terminal, fence wiring terminal series, spring wiring terminal series, track wiring terminal series, through wall wiring terminal series, optoelectric coupling wiring terminal series, 110 terminal, 205 terminal, 250 terminal, 187 terminal and OD2 2 ring terminal, ring terminal, ring terminal flag series terminal and sheath series, various ring terminals, tubular terminals, wiring terminals, copper strip and iron strip, atď.

The materials to be prepared for the use of wiring terminals include terminal lugs, screwdrivers, a drôty.

1. Po prvé, peel off the insulation skin of the wire by 6-8 mm.

2. Then insert the exposed wire into the wiring terminal.

3. Then tighten the top screw with a screwdriver.

4. Pull with your hand to make sure it doesn’t fall.

5. Then press the switch and see that the light is on so that the wiring of the terminal is completed.