松套绞合水下光缆

松套绞合水下光缆

光纤元件
Oil-Filled Loose Tubing
Steel Wire Armor
PE inner jacket
Water Resistant Tape
Rip Cord
Wrinkled Steel Tape Armor
PE Outer Jacket

标准:
GR409-CORE TIA/EIA 568B.3 ICEA-S-83-59

Cable Mechanical Properties:

最小弯曲半径
允许挤压力
最大压力
温度范围
环绕式
循环力
已安装: 20 x 实际外径: 10 x
875牛/厘米 (500磅/英寸 3.5N/厘米 (LG)
2000氮
工作温度范围: -40°C 至 +70°C 储存温度范围: -50°C 至 +70°C
20 铠装电缆几周, 100 非铠装电缆几周
2.9 牛米 (J) 3*2 影响

Fiber Optic Cable Parameters:

Fiber Core Number
标称重量 (kg/km)
标称重量 (磅/有限公司)
公称外径 (毫米)
公称外径 (在)
最大张力
2-24
650
436.24
20.3
0.798
8000/1800
2650/595
26-36
716
480.54
21.6
0.849
8000/1800
2650/595
38-72
1008
676.51
25.2
0.991
8000/1800
2650/595

应用领域:

Loose-set laminated fiber optic cable underwater has good tensile strength, lateral compression resistance and excellent mechanical properties, 并能很好地适应周围的工作环境. The small diameter and light weight, combined with good tensile strength and lateral compression resistance, make them suitable for underwater working environments and are used to connect communication equipment and persistent information systems.
Loose-sleeved laminated stranded underwater fiber optic cables contain 5-36 光纤, consisting of a total of 3 layers of loose-sleeved tubing and filler around a central reinforcing key, plus a PE outer jacket. Each bundle contains 4-12 fibers, and solid or multi-stranded steel wire with polyethylene is usually used as the central reinforcement bond. If a metallic reinforcement bond is not required, FRP can be used as the center reinforcement bond. Spun sand or glass filaments are used around the bundle to provide protection and increase the tensile strength. The first layer of this cable is a PE inner jacket and crumpled steel tape armor, the second layer is a PE inner jacket and steel wire armor, followed by a PE outer jacket. Adding a layer of aluminum tape inside the sheath provides moisture resistance and shielding, and adding a cut cord inside the sheath facilitates the movement of the fiber optic cable.

    请随时在下面的表格中提出您的询问.


    订阅!