A oklopljeni kontrolni kabl se uglavnom koristi kao priključna linija električnih instrumenata.
Pogodan je za priključne linije električnih instrumenata sa naizmeničnim naponom od 450/750V i niže i prenosni vod automatskog upravljačkog sistema.
Ima izvrsna svojstva kao što je otpornost na ulje, otpornost na vodu, otpornost na habanje, otpornost na kiseline i alkalije, otpornost na razne korozivne gasove, otpornost na starenje, i nezapaljivost.
A oklopljeni kontrolni kabl is a cable with a layer of mesh copper or metal wire woven around one or more wires. This layer of mesh metal wire can prevent lightning strikes and external signals cannot interfere with it.
The shield also provides some leakage protection. If the cable is damaged during use and leaks, the shield can direct the leakage current to the ground wire, providing some safety protection.
The role of shielding and grounding wire of shielded control cable is that the shielding layer is divided into internal shielding and external shielding.
They are both to make good contact between the cable conductor and insulation layer, and between the cable insulation layer and the inner protective layer, to eliminate the increase of surface electric field strength caused by the unsmooth surface of the conductor and the inner protective layer.
Product characteristics of shielded control cables.
(1) Allowable bending radius of the cable: the minimum bending radius of a non-armored cable is 6 times the outer diameter of the cable. Fluoroplastic insulated and sheathed cables should be at least 8 puta veći od spoljašnjeg prečnika kabla. Copper tape shielded or steel tape armored cable should be at least 12 puta veći od spoljašnjeg prečnika kabla.
(2) Maximum operating temperature: polytetrafluoroethylene propylene (F46) insulation should not exceed 200 ℃. Soluble polytetrafluoroethylene (PFA) insulation should not exceed 260 ℃.
(3) Minimum ambient temperature. PVC sheath: fixed laying -40℃, non-fixed laying -15℃. Fluorine plastic and silicone rubber sheath: fixed laying -60℃, non-fixed laying -20℃. Cable installation and laying temperature shall not be lower than 0℃ (fluoroplastic, silicone rubber and nitrile sheathed cable shall not be lower than -25℃).
Kako obnovljiva energija nastavlja da dobija zamah, its future will be shaped not just by…
I. Uvod U svijetu koji se suočava s dvostrukim izazovima klimatskih promjena i iscrpljivanja resursa,…
3. Kako odabrati pravi kabel za poljoprivredne primjene 3.1 Select Cable Type Based…
Driven by the global wave of agricultural modernization, agricultural production is rapidly transforming from traditional…
Kako se globalna rudarska industrija i dalje širi, mining cables have emerged as the critical…
Uvod: Važnost elektrotehnike i uloge ZMS kablovskog elektrotehnike, as…